Re: Anything to be "aware of" when connecting KX3 to new KXPA100?

[Don Wilhelm]

Jim,

There are diagrams in the KXPA100 manual, just connect it like it shows.
Be sure all connectors are fully seated, especially the RJ-45 plug.  It
should click when it is fully inserted.  You may have to pull back the
cover and push on the actual plug instead of pushing on the cover.

73,
Don W3FPR

On 1/26/2017 2:25 PM, James Rodenkirch wrote:
> Just ordered the KXPA100 (no KXAT100) and KXPACBL cabling package -  so wonder if there are any "watch out for this" tidbits of info to be aware of when connecting the cabling and turning it on.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob N3MNT]

Unless you plan to use two antennas connected to the amp, use the KXPA100 utility to disable Ant 2 so that you do not accidentally select it when hitting auto tune.  If you decide to go add a second ant later on, you can easily change it.