Hi,
while I haven't tried this, why not run a plug-in
cable from the rear audio jack to a DPDT switch in a
small box, or even a pill bottle, or similar. Then,
run a cable from one side of the switch to your
soundcard interface, and the other side to a speaker
or phones. You could also do this from the front audio
jack, you'd just need a 3pole-double throw switch
(since the front is stereo). Then simply flip the
switch to whichever one you wanted audio to go to
(soundcard or speaker/phones).
Seems to me this should work. Not as sophisticated
as a built in board, but in keeping w/the KISS
Principle.
72 de N8PVZ
---bernie gaffney
---
[hidden email] wrote:
>
> After wearing out the front panel headphone
> connector (twice in 2 years....due to
> connecting/disconnecting the soundcard cable for HF
> digital modes) it has become quite obvious that I
> need a dedicated HF digital interface port for my
> K2/100.
<snip>
> 73,
> Tony L. (KJ5XF)
>
____________________________________________________________________________________
It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.
http://tools.search.yahoo.com/toolbar/features/mail/_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
