Re: Defining the P3 IF Frequency

[John Hendricks-2]

I have a K3 and a Icom VHF/UHF radio with a IF tap/amplifier (10.5 MHz)
that I occasionally have connected to the P3 which works great, but I find
it a pain to set and reset the cables RS232, IF input and IF frequency
settings as I move back and forth. It would be much easier to just tap one
of the function buttons on the P3.  I didn't think much about this until I
noticed a posting where the second receiver in a K3 was being connected to
a P3.

John K7JLT

On May 6, 2017 8:30 AM, "Doug Hensley" <[hidden email]> wrote:

> John, do you have any experience using the P3 with the K2 and do you know
> how to enter a new IF frequency into the P3 that it does not already know
> about ?
>
>
> Thanks,
>
>
> Doug W5JV
>
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 5 May 2017 19:47:30 -0700
> From: John Hendricks <[hidden email]>
> To: [hidden email]
> Subject: [Elecraft] Wish List P3
> Message-ID:
>         <CAGUxkM6m+e79N7gsovbOFzHzWiccHh1Vti+
> [hidden email]>
> Content-Type: text/plain; charset=UTF-8
>
> I would like to see two switchable IF inputs on the P3 with different
> profiles so I could easily select different radios.
>
> John K7JLT
>
> John K7JLT
>
>
> ------------------------------
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]