Looking at the current manual (Rev C5), the error is referenced on page 47. Looks like the radio is not seeing the 2 Meter module. Troubleshooting is to make sure it is correctly installed, and to refer to the 2M/4M installation manual about how to do that.
John, KC7DRI
________________________________
From:
[hidden email] <
[hidden email]> on behalf of richard aubrey via Elecraft <
[hidden email]>
Sent: Thursday, October 15, 2020 6:26 AM
To:
[hidden email] <
[hidden email]>
Subject: Re: [Elecraft] ERR 2M
Upon turning on my KX3 I get an ERR 2M with d=001.I don’t see that error in the manual.
Richard w2ssx
Sent from Mail for Windows 10
From:
[hidden email]
Sent: Wednesday, October 14, 2020 10:44 AM
To:
[hidden email]
Subject: Elecraft Digest, Vol 198, Issue 15
S
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
