The easiest way I've found to reroute signal lines in these sorts of cables is to build a little "adapter" of back-to-back DB shells (9, 15, 25), one male and one female, separated by a pair of 1" 4-40 hex standoffs. You then wire between the shells whatever pinout changes you need. Relatively straightforward and doesn't wreck the original cable. That's how I did it on my setup (identical to yours).
>
>
> Message: 21
> Date: Sun, 15 May 2016 11:43:05 -0400
> From: Art <
[hidden email]>
> To:
[hidden email]
> Subject: [Elecraft] KPA500 with K3/0 and remote rig
> Message-ID: <
[hidden email]>
> Content-Type: text/plain; charset=utf-8
>
> Hi all,
>
>
> Interested in using the KPA500 via remote. K3/0 manual states that a simple mod to the KPAK3AUX cable is needed.
>
>
> However, this cable from factory has a molded shell on both ends. Anyone figured out how to access it to make the wiring connection needed?
>
>
> Thanks.
>
>
> Art KZ5D
>
>
> ------------------------------
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
