Re: Elecraft Digest, Vol 158, Issue 14

[Pentti A J Pajunen]

Hi Ya OTs & other CW improvers. No absolute truth in learnig the Morse
(rather Veil) code.

1. Rag chewing with highest speed you can read in your head
2. Take a buzzer (may be your rig monitoring, not transmitting), some
journal and start sending the code as fast U can

Sending the code is as good as anything else "schooling" Ur brain.
K-radios have exellent keyers and sending monitors for practising.

I love HAM radio and Competition dancing (with my XYL). The more I can
practise the more I can reach in CW and the more I can "see" as an
adjudicator in dancing competitions. Both hobbies are the best U can do
fully clothed - in publick.

73 & CU, don't give up!
Penna OH2G, OH2CG



[hidden email] kirjoitti 12.06.2017 klo 18:04:

> Send Elecraft mailing list submissions to
> [hidden email]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> [hidden email]
>
> You can reach the person managing the list at
> [hidden email]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
>     1. Re: OT Learning Morse anew (Rod Hardman(VA3ON))
>     2. Re: mic (Brian Denley)
>     3. Re: 6m off-frequency (Mike Rhodes)
>     4. Re: mic - David Clark (John Severyn)
>     5. Re: mic (Dwight Anderson)
>     6. Re: mic - David Clark (Randy Farmer)
>     7. Re: mic (Dwayne Rohmer)
>     8. Re: 6m off-frequency (Ron D'Eau Claire)
>     9.  mic ([hidden email])
>    10. Re: mic (Walter Underwood)
>    11. Re: mic - David Clark (Wes Stewart)
>    12. Re: OT Learning Morse anew (Erik Basilier)
>    13. Re: OT Learning Morse anew (Rick M0LEP)
>    14. Re: 6m off-frequency (Richard Lamont)
>    15. NoGaQRP Rig Stands (Richard Thorne)
>    16. Re: OT Learning Morse anew (Victor Rosenthal 4X6GP)
>    17. Re: OT Learning Morse anew (Kevin - K4VD)
>    18. Re: MH3 rattle? (ke9uw)
>    19. Re: OT Learning Morse anew (Scott Manthe)
>    20. Flash mob experiment, right now, 28.050 +/- 5? (Wayne Burdick)
>    21. Re: Flash mob experiment, right now, 28.050 +/- 5?
>        ([hidden email])
>    22. Re: Flash mob experiment, right now, 28.050 +/- 5?
>        ([hidden email])
>    23. Re: mic (Jim Brown)
>    24. Re: Flash mob experiment, right now, 28.050 +/- 5? (Wayne Burdick)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 11 Jun 2017 20:52:01 -0400
> From: "Rod Hardman(VA3ON)" <[hidden email]>
> To: Jim Sr Sturges <[hidden email]>
> Cc: Elecraft Reflector <[hidden email]>
> Subject: Re: [Elecraft] OT Learning Morse anew
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=us-ascii
>
> Jim
> I'll endorse your experience with the installation PAE's excellent heatsink for the KX2.
> I jumped into that operation with a Swiss Army knife and a set of forceps at the hotel while at Dayton hamvention.
> Holding on the two washers, nut and bolt simultaneously in a confined space is playing "Twister" with your fingers!
> That said, I love the kit - combined with the Lexan cover, the kit is both functional and attractive.
> Fun to get an installation challenge from time to time!!
> /Rod VA3ON
>
> On Jun 11, 2017, at 18:25, Jim Sr Sturges <[hidden email]> wrote:
>
> I think I learned code all wrong. Can't ever seem to get my speed up.
>
> Surely some of the astute among you _know_ The Perfect Method, and I hope
> you will share?
>
> To complete the OT-ness of this msg, I recently completed the QRP Labs
> Ultimate WSPR/QRSS kit and re-learned the joys of soldering iron burns,
> again. Certainly nothing wrong with Hans' excellent kits, and the price is
> amazing for the functionality, design, and quality.
>
> Then I installed the PAE heat sink end panels on my KX2. The latter is not
> for the faint of heart! I STRONGLY recommend the somewhat buried hint in
> PAE's instructions to remove the AT board before attaching the PA
> transistors to the heat sink. Tried it the other way and re-discovered that
> my micromanipulation skills are right up there with my CW -- maybe better,
> which is damned depressing.
>
> So, any help mastering Morse?
>
> Thanks in advance and 73,
>
> Jim N3SZ
>

--
73&CU Penna, OH2G, OF2CG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]