Re: Elecraft Digest, Vol 168, Issue 13

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Re: Elecraft Digest, Vol 168, Issue 13

Bob McGraw - K4TAX
With #10 AWG wire for the DC power cable, set the supply no load voltage
to 14.0.  This is well within the safe operating range of the radio per
Elecraft specifications.     [Minimum 11.0 volts, Maximum 15.0 volts]

In transmit 100 watts, you should see 13.5 volts or more at the radio.  
You can easily and accurately monitor the voltage at the radio, no load
and load, by setting the DISP to read voltage.  If you have more than a
0.5 volt drop between receive and transmit in CW mode, 100 watts, key
down, either there is a power supply regulation issue, or the IR drop in
the power cables and connections are  excessive.

Also, the radio should be connected direct to the power supply terminals
and not through some other power distribution means. { I don't care what
the advertisers say.}     IR drop is IR drop and every conductor and
every connector is a contributor to IR drop.

73

Bob, K4TAX



On 4/12/2018 6:07 AM, [hidden email] wrote:

> Message: 2
> Date: Wed, 11 Apr 2018 12:02:38 -0400
> From:"[hidden email]"  <[hidden email]>
> To:[hidden email]
> Subject: [Elecraft]  Astron VS-35M Powwer Supply V-
> Message-ID:<[hidden email]>
> Content-Type: text/plain;charset=utf-8
>
> My 70amp Astron has 1/4" lugs and they seem to make a secure connection.
> Do to my longer lead length (power supply on floor) I used 8ga wire. This
> was difficult to stuff into the K3S sized PowerPole. Even with the shorter
> leads that I use on contest expeditions along with a switching power
> supply I found that I need 10ga wire to keep the voltage above 13.5 on TX.
> I think that larger PowerPoles or studs would have been nicer for those
> interested in keeping the K3S voltage in the desirable range. Double as
> Joe suggested would also work if you wanted to run two sets of wires.
>
> John KK9A

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]