Re: Elecraft Digest, Vol 175, Issue 10

[Ronald Sihtala]

Sent from my iPad

> On Nov 13, 2018, at 9:33 PM, [hidden email] wrote:
>
> Send Elecraft mailing list submissions to
>    [hidden email]
>
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
>    [hidden email]
>
> You can reach the person managing the list at
>    [hidden email]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
>   1. Spam filtering (Dauer, Edward)
>   2. Re: Spam filtering (Walter Underwood)
>   3. Re: Interface cable question (Nr4c)
>   4. W6SFM Bug Roundup Event is Next Weekend! (W6SFM)
>   5. Re: Spam filtering (Eric Swartz - WA6HHQ, Elecraft)
>   6. Re: Spam filtering (Rick Robinson)
>   7. Elecraft CW Net Announcement (kevinr)
>   8. K2/100 Package For Sale (Kenneth P Alexander)
>   9. Re: Spam filtering (Eric Swartz - WA6HHQ, Elecraft)
>  10. Re: FS: KPA500/KAT500 Combo (W0FK)
>  11. K3 Monitor line in (John Simmons)
>  12. KX2 High SWR ON 20m (Adrian Young)
>  13. Elecraft CW Net Report (kevinr)
>  14. K3 + SDRPlay's RSP1 as panadaptor (TL_Netvision)
>  15. WSJT-X Disabling TX INHIBIT on K3S (John Stengrevics)
>  16. Re: WSJT-X Disabling TX INHIBIT on K3S (Don Wilhelm)
>  17. K3 time between PTT & RF out (TL_Netvision)
>  18. Re: K3 time between PTT & RF out (Don Wilhelm)
>  19. Re: WSJT-X Disabling TX INHIBIT on K3S (John Stengrevics)
>  20. Re: K3 + SDRPlay's RSP1 as panadaptor (Drew AF2Z)
>  21. Re: K3 + SDRPlay's RSP1 as panadaptor ([hidden email])
>  22. Re: K3 + SDRPlay's RSP1 as panadaptor (Drew AF2Z)
>  23. WSJT-X Disabling TX INHIBIT on K3S (ANDY DURBIN)
>  24. Re: WSJT-X Disabling TX INHIBIT on K3S (Joe Subich, W4TV)
>  25. Re: K3 + SDRPlay's RSP1 as panadaptor (Don Wilhelm)
>  26. Re: WSJT-X Disabling TX INHIBIT on K3S (ANDY DURBIN)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 10 Nov 2018 19:26:10 +0000
> From: "Dauer, Edward" <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Subject: [Elecraft] Spam filtering
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset="utf-8"
>
> Before the authorities close this useful but somewhat-OT thread, I would share one anecdote told to me to be true, though I can't personally vouch for it, about an unnamed university twenty-plus years ago.  The IT department decided to install filters that would block both incoming and outgoing e-mail that contained offensive language.  So they made up a dirty words list, not telling any of the clients what was on it or even that it existed.  It was discovered when the Political Science Department got no responses to its e-blast announcement of a conference titled something like "Contemporary Issues in Capitalism, Socialism, and Communitarianism."  
>
> The word Socialism contains the word Cialis.  
>
> Or so the story goes.
>
> Ted, KN1CBR
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 10 Nov 2018 11:35:31 -0800
> From: Walter Underwood <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Subject: Re: [Elecraft] Spam filtering
> Message-ID: <[hidden email]>
> Content-Type: text/plain;    charset=utf-8
>
> That did used to happen with brute-force algorithms.
>
> For the past 15 years or more, spam filtering has been an arms race. Spammers automiatically open a bunch of email accounts on a free provider, then have scripts try different variations until something would get through. Then they hammer the service with that spam until it was blocked. Then try again. Spam can evolve hour-by-hour to find weaknesses in the algorithms.
>
> Similar stuff happens with spiders for web search engines. I?m glad to not be in that business any more.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
>> On Nov 10, 2018, at 11:26 AM, Dauer, Edward <[hidden email]> wrote:
>>
>> Before the authorities close this useful but somewhat-OT thread, I would share one anecdote told to me to be true, though I can't personally vouch for it, about an unnamed university twenty-plus years ago.  The IT department decided to install filters that would block both incoming and outgoing e-mail that contained offensive language.  So they made up a dirty words list, not telling any of the clients what was on it or even that it existed.  It was discovered when the Political Science Department got no responses to its e-blast announcement of a conference titled something like "Contemporary Issues in Capitalism, Socialism, and Communitarianism."  
>>
>> The word Socialism contains the word Cialis.  
>>
>> Or so the story goes.
>>
>> Ted, KN1CBR
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 10 Nov 2018 15:17:33 -0500
> From: Nr4c <[hidden email]>
> To: Terry Brown <[hidden email]>
> Cc: [hidden email]
> Subject: Re: [Elecraft] Interface cable question
> Message-ID: <[hidden email]>
> Content-Type: text/plain;    charset=us-ascii
>
> Elecraft Cable Set for JX3 might work. Not that familiar with KX2 cabling. Check it out!
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Nov 10, 2018, at 11:38 AM, Terry Brown <[hidden email]> wrote:
>>
>> I just purchased a miniHFPA2 amplifier to use with my KX2 when I am in the
>> field and don't want to lug around my KXPA100.  I need to build/buy an
>> interface cable that will go from the ACC jack on the KX2 to the RCA PTT
>> jack on the miniHFPA2 amp.  Can anyone tell me where to get an interface
>> cable or if there is any other interfacing need besides connecting the four
>> conductor plug's sleeve to the ground of the RCA plug and ring 2, key out to
>> the center conductor?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Terry, N7TB
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
>
>
> ------------------------------
>
> Message: 4
> Date: Sat, 10 Nov 2018 13:20:29 -0800
> From: W6SFM <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Subject: [Elecraft] W6SFM Bug Roundup Event is Next Weekend!
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Announcing W6SFM's BUG ROUNDUP
>
> The Samuel F. Morse Amateur Radio Club, a Sacramento, California based
> CW enthusiast club wanted a special time to bring bug operators together
> on the air. In the same spirit as ARRL's Straight Key Night,
> participants are encouraged to make simple, conversational,
> ?chewing-the-fat? QSOs using their bug type key. This is an opportunity
> to exercise, share and exhibit your personalized fist. This is NOT a
> contest. However, there is a very easy and quick requested signup form
> that can be found at https://w6sfm.com/bug-roundup/. Once you have read
> the page, and optionally registered for the event simply Call "CQ BR" so
> folks know you are a Bug Roundup Participant.? So lets grab that*bug*,
> clean those contacts, and let?er fly! We want to hear that ?Banana Boat
> / Lake Erie Swing" or that commercial KPH/WCC quality fist.
>
> *Reserve the date!*The event begins on Saturday November 17th (00:00
> UTC) and concludes Sunday Nov. 19th (23:59 UTC), 2018
> That's 4:00 PM Friday (Nov. 16th) afternoon until? 3:59 PM Pacific Time
> Sunday (Nov. 19th LOCAL Time).
>
> For more information, to register your station, and to help assist in
> spotting, potentially increasing QSOs, an*On-line chat window*link can
> be found near the bottom of Bug Roundup home page located at
> https://w6sfm.com/bug-roundup/ We hope to hear you all on the air! 73,
>
> W6SFM
>
> --
> W6SFM
> www.w6sfm.com
>
>
>
> ------------------------------
>
> Message: 5
> Date: Sat, 10 Nov 2018 17:46:27 -0800
> From: "Eric Swartz - WA6HHQ, Elecraft" <[hidden email]>
> To: Elecraft list <[hidden email]>
> Subject: Re: [Elecraft] Spam filtering
> Message-ID: <[hidden email]>
> Content-Type: text/plain;    charset=us-ascii
>
> Thread now closed (including related SPAM discussion threads.  :-)
>
> 73,
> Eric
> Mooderator
> elecraft.com
> _..._
>
>
>
>> On Nov 10, 2018, at 11:26 AM, Dauer, Edward <[hidden email]> wrote:
>>
>> Before the authorities close this useful but somewhat-OT thread, I would share one ...
>
>
> ------------------------------
>
> Message: 6
> Date: Sat, 10 Nov 2018 21:47:45 -0500
> From: Rick Robinson <[hidden email]>
> To: "Eric Swartz - WA6HHQ, Elecraft" <[hidden email]>
> Cc: Elecraft list <[hidden email]>
> Subject: Re: [Elecraft] Spam filtering
> Message-ID:
>    <CALvs4h8U_TZJciuyTjkS_L=U=[hidden email]>
> Content-Type: text/plain; charset="UTF-8"
>
> How are you folks during with all the fires ? ????????
>
> On Sat, Nov 10, 2018 at 8:47 PM Eric Swartz - WA6HHQ, Elecraft <
> [hidden email]> wrote:
>
>> Thread now closed (including related SPAM discussion threads.  :-)
>>
>> 73,
>> Eric
>> Mooderator
>> elecraft.com
>> _..._
>>
>>
>>
>>> On Nov 10, 2018, at 11:26 AM, Dauer, Edward <[hidden email]> wrote:
>>>
>>> Before the authorities close this useful but somewhat-OT thread, I would
>> share one ...
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
> --
> Rick Genesis 1-29
>
>
> ------------------------------
>
> Message: 7
> Date: Sat, 10 Nov 2018 19:00:58 -0800
> From: kevinr <[hidden email]>
> To: [hidden email]
> Subject: [Elecraft] Elecraft CW Net Announcement
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Good Evening,
>
> ?? It is easier to see through the woods because almost all of the
> leaves have fallen.? The hours we have with which to see those woods has
> diminished.? I can't seem to get things done before dark because it
> starts so early.? Well this has effected the nets.? I plan to run both
> of them earlier than normal.? Instead of keeping the local times and
> changing the UTC numbers I am staying with the Universal time and
> changing the local.? For me that works out to 2 and 4 PM.? 4 PM should
> give us enough time to run the 40 meter net before dark.? If those times
> don't work we'll have to try something else.? From what I heard there
> was a measure on the California ballot to eliminate changing the clock
> twice a year. Folks in Oregon and Washington are waiting on those
> results.? If all goes well, and the US Congress agrees, we may not have
> spring ahead and fall back again within a few years.? One can dream.
>
>
> Please join us tomorrow on:
>
> 14050 kHz at 2200z Sunday (2 PM PST Sunday)
> ? 7047 kHz at 0000z Monday (4 PM PST Sunday)
>
> 73,
> Kevin. KD5ONS
>
> _
>
>
>
> ------------------------------
>
> Message: 8
> Date: Sun, 11 Nov 2018 11:08:26 +0700
> From: Kenneth P Alexander <[hidden email]>
> To: [hidden email]
> Subject: [Elecraft] K2/100 Package For Sale
> Message-ID:
>    <CAPOM0d=-4sA=[hidden email]>
> Content-Type: text/plain; charset="UTF-8"
>
> I have a K2/100 for sale.  I acquired it a year ago from another amateur.
> He demonstrated it for me and I saw that it worked.  I have not used it
> since then.  Included:
>
> - Elecraft K2/100 HF Transceiver with 100W amplifier and RS232 I/O module
> - K2DSP internal DSP filter and real-time clock
> - KSB2 SSB adapter
> - KNB2 noise blanker
> - K60XV 60m and transverter adapter
> - K160RX 160M module
> - External KAT100 automatic antenna tuner
>
> It's in good condition and everything works.  However, as I said I never
> sat down and used it.  Instead, I retired and moved to Thailand where I now
> live.  I wanted a K2 because it's on the Thai government's short list of
> type approved transceivers, i.e., it doesn't cover 6m or 70cm, which aren't
> currently legal bands here).  Once I arrived I discovered that I can't ever
> get a Thai ham license because Canada doesn't have a reciprocal licensing
> agreement with Thailand.  So the K2 is of no further use to me.
>
> The equipment is still in Canada.  My friend VE3EG, Keith is handling the
> sale and shipping on my behalf.  You can direct questions to me, but I will
> turn things over to Keith once we have ourselves a deal.
>
> Price for the package is Cdn $1,400 (about U.S. $1,060 at current exchange
> rates).  Shipping is extra and is based shipping from Toronto to your QTH.
>
> Many thanks and 73!
>
> Ken Alexander, VE3HLS
> So Phisai, Thailand
> Blog:  bueng-ken.com
>
>
> ------------------------------
>
> Message: 9
> Date: Sat, 10 Nov 2018 21:41:54 -0800
> From: "Eric Swartz - WA6HHQ, Elecraft" <[hidden email]>
> To: Rick Robinson <[hidden email]>
> Cc: Elecraft list <[hidden email]>
> Subject: Re: [Elecraft] Spam filtering
> Message-ID: <[hidden email]>
> Content-Type: text/plain;    charset=utf-8
>
> Hi Rich,
>
> No problems. We are many hundreds of miles north and south of the fires here on the Monterey Bay. (About at the middle of the state on the coast.). But we are seeing some smoke getting blown down here in the last day or so.
>
> Thanks for the concern!
>
> Regards,
> Eric
> elecraft.com
> _..._
>
>> On Nov 10, 2018, at 6:47 PM, Rick Robinson <[hidden email]> wrote:
>>
>> How are you folks during with all the fires ? ????????
>
>
> ------------------------------
>
> Message: 10
> Date: Sat, 10 Nov 2018 23:20:03 -0700 (MST)
> From: W0FK <[hidden email]>
> To: [hidden email]
> Subject: Re: [Elecraft] FS: KPA500/KAT500 Combo
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=us-ascii
>
> Accidentally deleted the post - but both units sold. Thanks to all who
> responded.
>
>
>
> -----
> St. Louis, MO
>
> "The difference between stupidity and genius is that
> genius has its limits." Albert Einstein
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
>
>
> ------------------------------
>
> Message: 11
> Date: Sun, 11 Nov 2018 12:33:49 -0600
> From: John Simmons <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Subject: [Elecraft] K3 Monitor line in
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Is there a way to configure Monitor so that it mutes the rear panel Mic
> but not the Line In? I use a voice keyer driving the Line In but a desk
> mic for fills and don't want to use headphones.
>
> -John NI0K
>
>
> ------------------------------
>
> Message: 12
> Date: Mon, 12 Nov 2018 16:58:14 +0000
> From: Adrian Young <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Subject: [Elecraft] KX2 High SWR ON 20m
> Message-ID:
>    <[hidden email]>
>    
> Content-Type: text/plain; charset="utf-8"
>
> Hi all. Having an issue with my KX2. Took it out /p on Saturday and connected it to my usual linked dipole for 20/40m, tuned and ran a nice little pile up on 40, split the links and hit tune on 20m and got 25.4:1 swr. Weird first time that?s happened. Closed the links and sure enough it tuned up for 40 fine. So I suspected the antenna is fine. Got home and connected the KX2 to a dummy load and it will tune on every band except 20. Maybe something has come adrift inside, I?m not sure. Any ideas where to start diagnosing this one? #00358, atu and clock options fitted.
>
> Regards
>
> Adrian
> MM0TAI
> Sent from my iPhone
>
> ------------------------------
>
> Message: 13
> Date: Mon, 12 Nov 2018 16:49:04 -0800
> From: kevinr <[hidden email]>
> To: [hidden email]
> Subject: [Elecraft] Elecraft CW Net Report
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
> Good Evening,
>
> ?? The new time for the twenty meter net worked well.? Signals were
> clear, easy copy, even with deep QSB.? I gave one report as the range S2
> to S8.? The new time for the forty meter net was not as good.? Signals
> had the same deep QSB but were weaker with more band noise.? Now to
> figure out when forty meters works better.? I am not sure whether to
> move it earlier or later to get the best propagation paths.
>
>
> ? On 14049.5 kHz at 2200z:
>
> NO8V - John - MI
>
> W0CZ - Ken - ND
>
> AB9V - Mike - IN
>
> K6XK - Roy - IA
>
> KL7CW - Rick - AK
>
> K4TO - Dave - KY
>
>
> ? On 7046 kHz at 0000z:
>
> K0DTJ - Brian - CA
>
> WM5F - Dwight - ID
>
> W8OV - Dave - TX
>
>
> ?? It has gotten cold enough to prevent all but the most hardy spiders
> from building webs.? I still get one in the face now and then.? There
> are some mushrooms but only a few scattered chanterelles.? Thinning
> trees has changed how the deer walk near the house.? The new path is
> only a few feet from where I am sitting.? A few days ago I was
> interrupted by a doe browsing on a shrub a few feet away.? She ate her
> way around the house from window to window.? I lost sight of her as she
> walked around back. I got lost in work until another ear flick out the
> left hand window got my attention.? Another deer.? Only this one was not
> acting the same.? Then I noticed two little buttons on his head. The
> shortest antlers I had ever seen; they just barely poked out of the
> fur.? He was following the scent trail of the doe not the path she had
> walked.? A minute or two later he was off behind the house too.
>
> ?? Until next week,
>
> ?????? 73,
>
> ??????????? Kevin.? KD5ONS
>
>
> -
>
>
>
>
>
>
> ------------------------------
>
> Message: 14
> Date: Tue, 13 Nov 2018 20:49:12 +0200
> From: TL_Netvision <[hidden email]>
> To: [hidden email]
> Subject: [Elecraft] K3 + SDRPlay's RSP1 as panadaptor
> Message-ID: <003b01d47b81$91ed9090$b5c8b1b0$@netvision.net.il>
> Content-Type: text/plain; CHARSET=US-ASCII
>
> Hello guys,
>
> Thanks all who have provided  very fine inputs on the matter.
>
> To conclude my panadaptor experience, for now It's HDSDR with a straight IF
> connection from the K3 to the RSP-1.
> The only remaining issue is better calibrating the RSP-1 thus equating the
> audio when one follows the other.
>
> SDRCONSOLE & SDRUNO were ruled out as they still have some issues working in
> IF mode,
>
> Isaac, 4Z1TL
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> ------------------------------
>
> Message: 15
> Date: Tue, 13 Nov 2018 14:35:16 -0500
> From: John Stengrevics <[hidden email]>
> To: Elecraft Reflector <[hidden email]>
> Subject: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S
> Message-ID: <[hidden email]>
> Content-Type: text/plain;    charset=us-ascii
>
> I asked this question previously and was told that the WSJT-X would not effect TX INHIBIT on the K3S.
>
> In trying to confirm this just now, TX INHIBIT is clearly disabled when I call CQ on FT8 digital mode.
>
> Any thoughts?
>
> John
> WA1EAZ
>
> ------------------------------
>
> Message: 16
> Date: Tue, 13 Nov 2018 14:54:57 -0500
> From: Don Wilhelm <[hidden email]>
> To: John Stengrevics <[hidden email]>,    Elecraft Reflector
>    <[hidden email]>
> Subject: Re: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> John,
>
> Contact the WSJT-X developers to see if any command they issue would
> disable K3 TX Inhibit. Since the exchange on FT8 is so rapid, my guess
> is that they may very well disable TX Inhibit as a "safety" measure.
>
> There is nothing about DATA A mode operation of the K3/K3S that would
> cause TX Inhibit to be disabled.
>
> 73,
> Don W3FPR
>
>> On 11/13/2018 2:35 PM, John Stengrevics wrote:
>> I asked this question previously and was told that the WSJT-X would not effect TX INHIBIT on the K3S.
>>
>> In trying to confirm this just now, TX INHIBIT is clearly disabled when I call CQ on FT8 digital mode.
>>
>> Any thoughts?
>>
>
>
> ------------------------------
>
> Message: 17
> Date: Tue, 13 Nov 2018 21:57:10 +0200
> From: TL_Netvision <[hidden email]>
> To: [hidden email]
> Subject: [Elecraft] K3 time between PTT & RF out
> Message-ID: <000701d47b8b$109d6c90$31d845b0$@netvision.net.il>
> Content-Type: text/plain; CHARSET=US-ASCII
>
> Hi all
>
> Please advise:
> What's the minimal time elapsing between a "PTT press" and "RF present at
> the antenna socket"?
> Is it the same when going from "PTT release" to "RF stopped" ?
>
>
> TIA,
> Isaac, 4Z1TL
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> ------------------------------
>
> Message: 18
> Date: Tue, 13 Nov 2018 15:14:13 -0500
> From: Don Wilhelm <[hidden email]>
> To: TL_Netvision <[hidden email]>, [hidden email]
> Subject: Re: [Elecraft] K3 time between PTT & RF out
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Isaac,
>
> Review the text for the TX DLY in the menu listing for the PTT Press to
> RF output part of your question.
>
> For the PTT Release to RF stopped, look at the PTT RLS menu parameter.
>
> 73,
> Don W3FPR
>
>> On 11/13/2018 2:57 PM, TL_Netvision wrote:
>> Hi all
>>
>> Please advise:
>> What's the minimal time elapsing between a "PTT press" and "RF present at
>> the antenna socket"?
>> Is it the same when going from "PTT release" to "RF stopped" ?
>
>
> ------------------------------
>
> Message: 19
> Date: Tue, 13 Nov 2018 15:56:26 -0500
> From: John Stengrevics <[hidden email]>
> To: [hidden email]
> Cc: Elecraft Reflector <[hidden email]>
> Subject: Re: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S
> Message-ID: <[hidden email]>
> Content-Type: text/plain;    charset=us-ascii
>
> Don,
>
> Thanks for that.  
>
> Just in case anyone else asks, I thought you could only select .1 or .2 seconds delay under ADVANCED settings in WSJT-X.  It turns out, you can enter any delay you want.  So, problem solved.
>
> 73,
>
> John
> WA1EAZ
>
>> On Nov 13, 2018, at 2:54 PM, Don Wilhelm <[hidden email]> wrote:
>>
>> John,
>>
>> Contact the WSJT-X developers to see if any command they issue would disable K3 TX Inhibit. Since the exchange on FT8 is so rapid, my guess is that they may very well disable TX Inhibit as a "safety" measure.
>>
>> There is nothing about DATA A mode operation of the K3/K3S that would cause TX Inhibit to be disabled.
>>
>> 73,
>> Don W3FPR
>>
>>> On 11/13/2018 2:35 PM, John Stengrevics wrote:
>>> I asked this question previously and was told that the WSJT-X would not effect TX INHIBIT on the K3S.
>>> In trying to confirm this just now, TX INHIBIT is clearly disabled when I call CQ on FT8 digital mode.
>>> Any thoughts?
>
>
>
> ------------------------------
>
> Message: 20
> Date: Tue, 13 Nov 2018 17:41:41 -0500
> From: Drew AF2Z <[hidden email]>
> To: [hidden email]
> Subject: Re: [Elecraft] K3 + SDRPlay's RSP1 as panadaptor
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I just got a RSP1A and am missing something here: if I connect my
> receive antenna to the K3 RX In, then connect the K3 RX Out to the SDR,
> what is the use of the tee?
>
> 73,
> Drew
> AF2Z
>
>
>
>
>> On 11/08/18 10:19, John Simmons wrote:
>> Isaac,
>>
>> I did exactly that, using the HDSDR software. I used the RX ANT output
>> (must activate it from the front panel of the K3) to feed the antenna of
>> the RSP1. You use a BNC tee to feed the antenna back into the K3.
>> Purists use an RF splitter instead of a tee. I have a YouTube video that
>> shows the results: https://www.youtube.com/watch?v=KusmkeLdfwE
>>
>> If you need further help, let me know.
>>
>> 73,
>> -John NI0K
>> TL_Netvision wrote on 11/8/2018 8:22 AM:
>>> Hello all,
>>>
>>> I am considering using an RSP1 SDR with my K3. I will probably use HDSDR
>>> software to start with.
>>> Can someone point me in the right direction for the whole procedure?
>>>
>>> TIA
>>> Isaac, 4Z1TL
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>
>
>
> ------------------------------
>
> Message: 21
> Date: Tue, 13 Nov 2018 14:52:51 -0800
> From: <[hidden email]>
> To: <[hidden email]>,    <[hidden email]>
> Subject: Re: [Elecraft] K3 + SDRPlay's RSP1 as panadaptor
> Message-ID: <029b01d47ba3$9c1aba30$d4502e90$@eversoles.com>
> Content-Type: text/plain;    charset="us-ascii"
>
> Allow other tools to look at RX out ?
>
> -----Original Message-----
> From: [hidden email] <[hidden email]> On
> Behalf Of Drew AF2Z
> Sent: Tuesday, November 13, 2018 2:42 PM
> To: [hidden email]
> Subject: Re: [Elecraft] K3 + SDRPlay's RSP1 as panadaptor
>
> I just got a RSP1A and am missing something here: if I connect my receive
> antenna to the K3 RX In, then connect the K3 RX Out to the SDR, what is the
> use of the tee?
>
> 73,
> Drew
> AF2Z
>
>
>
>
>> On 11/08/18 10:19, John Simmons wrote:
>> Isaac,
>>
>> I did exactly that, using the HDSDR software. I used the RX ANT output
>> (must activate it from the front panel of the K3) to feed the antenna
>> of the RSP1. You use a BNC tee to feed the antenna back into the K3.
>> Purists use an RF splitter instead of a tee. I have a YouTube video
>> that shows the results: https://www.youtube.com/watch?v=KusmkeLdfwE
>>
>> If you need further help, let me know.
>>
>> 73,
>> -John NI0K
>> TL_Netvision wrote on 11/8/2018 8:22 AM:
>>> Hello all,
>>>
>>> I am considering using an RSP1 SDR with my K3. I will probably use
>>> HDSDR software to start with.
>>> Can someone point me in the right direction for the whole procedure?
>>>
>>> TIA
>>> Isaac, 4Z1TL
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net Please help support this
>>> email list: http://www.qsl.net/donate.html Message delivered to
>>> [hidden email]
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html Message delivered to
>> [hidden email]
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to [hidden email]
>
>
>
> ------------------------------
>
> Message: 22
> Date: Tue, 13 Nov 2018 18:23:20 -0500
> From: Drew AF2Z <[hidden email]>
> To: [hidden email], [hidden email]
> Subject: Re: [Elecraft] K3 + SDRPlay's RSP1 as panadaptor
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I figured it out...
>
> I am using a separate receive only antenna: just connect it to RX IN,
> then connect the SDR to RX OUT; no tee needed.
>
> The tee version is for routing the K3 ANT1 and ANT2 (tx/rx antennas) to
> the SDR.
>
> 73,
> Drew
> AF2Z
>
>
>
>> On 11/13/18 17:52, [hidden email] wrote:
>> Allow other tools to look at RX out ?
>>
>> -----Original Message-----
>> From: [hidden email] <[hidden email]> On
>> Behalf Of Drew AF2Z
>> Sent: Tuesday, November 13, 2018 2:42 PM
>> To: [hidden email]
>> Subject: Re: [Elecraft] K3 + SDRPlay's RSP1 as panadaptor
>>
>> I just got a RSP1A and am missing something here: if I connect my receive
>> antenna to the K3 RX In, then connect the K3 RX Out to the SDR, what is the
>> use of the tee?
>>
>> 73,
>> Drew
>> AF2Z
>>
>>
>>
>>
>>> On 11/08/18 10:19, John Simmons wrote:
>>> Isaac,
>>>
>>> I did exactly that, using the HDSDR software. I used the RX ANT output
>>> (must activate it from the front panel of the K3) to feed the antenna
>>> of the RSP1. You use a BNC tee to feed the antenna back into the K3.
>>> Purists use an RF splitter instead of a tee. I have a YouTube video
>>> that shows the results: https://www.youtube.com/watch?v=KusmkeLdfwE
>>>
>>> If you need further help, let me know.
>>>
>>> 73,
>>> -John NI0K
>>> TL_Netvision wrote on 11/8/2018 8:22 AM:
>>>> Hello all,
>>>>
>>>> I am considering using an RSP1 SDR with my K3. I will probably use
>>>> HDSDR software to start with.
>>>> Can someone point me in the right direction for the whole procedure?
>>>>
>>>> TIA
>>>> Isaac, 4Z1TL
>>>>
>>>>
>>>> ---
>>>> This email has been checked for viruses by Avast antivirus software.
>>>> https://www.avast.com/antivirus
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:[hidden email]
>>>>
>>>> This list hosted by: http://www.qsl.net Please help support this
>>>> email list: http://www.qsl.net/donate.html Message delivered to
>>>> [hidden email]
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net Please help support this email
>>> list: http://www.qsl.net/donate.html Message delivered to
>>> [hidden email]
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html Message
>> delivered to [hidden email]
>>
>>
>
>
>
> ------------------------------
>
> Message: 23
> Date: Wed, 14 Nov 2018 00:16:24 +0000
> From: ANDY DURBIN <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Subject: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S
> Message-ID:
>    <[hidden email]>
>    
> Content-Type: text/plain; charset="iso-8859-1"
>
> "was told that the WSJT-X would not effect TX INHIBIT on the K3S."
>
>
> I did a quick check on my TS-590S with WSJT-X ver 1.9.1. TX inhibit is not cleared by WSJT-X and there is no transmission. If WSJT-X could clear a TX inhibit it would, in my opinion, be an appalling design flaw.
>
>
> I have been suggesting to a TS-590S user that they could use TX Inhibit to protect their rig when using an antenna switching system that takes longer to change from RX to TX than the maximum RF onset delay of the TS-590S. If WSJT-X could clear that inhibit it would make that protection useless and could cost hundreds of dollars in repair bills.
>
>
> Andy, k3wyc
>
>
> ------------------------------
>
> Message: 24
> Date: Tue, 13 Nov 2018 19:33:49 -0500
> From: "Joe Subich, W4TV" <[hidden email]>
> To: [hidden email]
> Subject: Re: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
> How does one implement TX Inhibit on a Kenwood TS-590?  I would
> like to include that information in some of the support material
> I produce for other products that interface with Kenwood rigs
> among others.
>
> I find no mention of a TX Inhibit in my review of the TS-590
> Instruction Manual (or the Instruction Manual for any other
> Kenwood transceiver).
>
> 73,
>
>    ... Joe, W4TV
>
>
>> On 2018-11-13 7:16 PM, ANDY DURBIN wrote:
>> "was told that the WSJT-X would not effect TX INHIBIT on the K3S."
>>
>>
>> I did a quick check on my TS-590S with WSJT-X ver 1.9.1. TX inhibit is not cleared by WSJT-X and there is no transmission. If WSJT-X could clear a TX inhibit it would, in my opinion, be an appalling design flaw.
>>
>>
>> I have been suggesting to a TS-590S user that they could use TX Inhibit to protect their rig when using an antenna switching system that takes longer to change from RX to TX than the maximum RF onset delay of the TS-590S. If WSJT-X could clear that inhibit it would make that protection useless and could cost hundreds of dollars in repair bills.
>>
>>
>> Andy, k3wyc
>
>
>
>
> ------------------------------
>
> Message: 25
> Date: Tue, 13 Nov 2018 20:03:41 -0500
> From: Don Wilhelm <[hidden email]>
> To: [hidden email], [hidden email]
> Subject: Re: [Elecraft] K3 + SDRPlay's RSP1 as panadaptor
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Drew,
>
> Your subject line indicates that you are using SDRPlay as a panadapter,
> and in that case, you would want to connect it to the K3 IF OUT and tune
> it to the K3 1st IF of 8.215 MHz.  The display will show you what is in
> the K3 IF.
>
> If instead you are using it as a sub-receiver, you would connect it to
> the K3 RX IN and OUT, or use a separate RX antenna on SDRplay.
>
> Two entirely different uses of SDRplay.
>
> 73,
> Don W3FPR
>
>> On 11/13/2018 5:41 PM, Drew AF2Z wrote:
>> I just got a RSP1A and am missing something here: if I connect my
>> receive antenna to the K3 RX In, then connect the K3 RX Out to the SDR,
>> what is the use of the tee?
>>
>
>
> ------------------------------
>
> Message: 26
> Date: Wed, 14 Nov 2018 02:33:28 +0000
> From: ANDY DURBIN <[hidden email]>
> To: "[hidden email]" <[hidden email]>
> Subject: Re: [Elecraft] WSJT-X Disabling TX INHIBIT on K3S
> Message-ID:
>    <[hidden email]>
>    
> Content-Type: text/plain; charset="iso-8859-1"
>
> "How does one implement TX Inhibit on a Kenwood TS-590?"
>
>
> On a TS-590S TX inhibit is menu 60. The EX command is used to change menu settings over CAT. For a TS-590S -
>
>
> EX06000000; reads the inhibit status
>
> EX060000001; sets TX inhibit
>
> EX060000000; clears TX inhibit
>
>
> For a TS-590SG the menu number is 66 so substitute 060 with 066 in the commands above.
>
>
> Note that, like almost all menu selections, the inhibit will only apply to the menu (A or B) in which it was set. To be safe it should be applied to both menus.
>
>
> Andy k3wyc
>
>
> ------------------------------
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> End of Elecraft Digest, Vol 175, Issue 10
> *****************************************

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]