Re: Elecraft Digest, Vol 22, Issue 2 Message 3 TVI

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: Elecraft Digest, Vol 22, Issue 2 Message 3 TVI

alan alan
Hi David,

My suggestion is a coaxial trap or possibly a series LC to deck (use
a trimmer C).  The insertion loss will be minimal.  A single trap had
little effect on the feed Z as shown on my Tx but ideally a second
one about lambda/4 at 145MHz further down the feeder will offset the
effect at 145.  I'll be interested to see how it works on the
harmonic.

Regards  73   Alan G0HIQ

> Message: 3
> Date: Wed, 1 Feb 2006 12:07:19 +0000
> From: David Pratt <[hidden email]>
> I am having a problem with 5th harmonic radiation from my
> XV144 transverter.  I have found that I am causing TVI to
> the UK analogue Channel 51 (711.25MHz) and digital Channel
> 52 (719.25MHz).  Other TV channels are free from interference.
> 73 de David G4DMP



               
___________________________________________________________
Yahoo! Photos – NEW, now offering a quality print service from just 8p a photo http://uk.photos.yahoo.com
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

TVI

David Pratt
Thank you, Alan, that is very helpful and will try that.  I have had a
suggestion that the problem could be due to high harmonic content from
the 28MHz output from the K2, so I am continuing with various test to
establish the cause.

73 de David G4DMP

>My suggestion is a coaxial trap or possibly a series LC to deck (use
>a trimmer C).  The insertion loss will be minimal.  A single trap had
>little effect on the feed Z as shown on my Tx but ideally a second
>one about lambda/4 at 145MHz further down the feeder will offset the
>effect at 145.  I'll be interested to see how it works on the
>harmonic.

>> I am having a problem with 5th harmonic radiation from my
>> XV144 transverter.  I have found that I am causing TVI to
>> the UK analogue Channel 51 (711.25MHz) and digital Channel
>> 52 (719.25MHz).  Other TV channels are free from interference.


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com