I agree with that, my pc of choice is a Mac, so its either got to be
platform independent or platform less, and I'm leaning towards the later.
Let us buy the display of our choice and support most reasonable
resolutions. USB K/B if you'll need one, but keypad controls on the unit
would be better.
However, I wonder if what Elecraft have in mind is a Panadapter in the
firmware of the K3 and use the ACC connector for a display. Or perhaps its
another plug-in module with an additional connector for display? Just done
see where that would fit on the back.
On 22/5/07 23:10, "
[hidden email]"
<
[hidden email]> sent:
> Message: 24
> Date: Tue, 22 May 2007 11:56:48 -0400
> From: "Don Nesbitt" <
[hidden email]>
> Subject: RE: [Elecraft] SDR UI
> To: "'Jack Smith'" <
[hidden email]>,
> <
[hidden email]>
> Message-ID: <000901c79c89$ce287900$6801a8c0@Dork1>
> Content-Type: text/plain; charset="us-ascii"
>
> Jack - I hope that Wayne and Eric contract with you to produce the
> "panadapter" for the K3. It should have that kind of functionality as well
> as at least a vertical line indicating the xcv freq and when split, both the
> tx and the rx should be indicated as well. Of course, a color display with
> the lines in different colors as well as a "sweep hold" function or at least
> a "peak sweep delay" of some sort. The ability to hook a large flat screen
> monitor would be very desirable as well. USB mouse port and no computer
> required.
--
Math Anxiety: an intense lifelong fear of two trains approaching each other
at speeds of 60 and 80 MPH. -Rick Bayan
K3 Anxiety: an intense short-term fear that your K3 will be delivered late
in July instead of early!
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
