Don't you just love this rig! And I haven't even got mine yet - very itchy
fingers.
On 22/6/07 09:06, "
[hidden email]"
<
[hidden email]> sent:
> Message: 9
> Date: Thu, 21 Jun 2007 10:04:31 -0700
> From: wayne burdick <
[hidden email]>
> Subject: [Elecraft] Re: K3 question: SWR monitor
> To: DOUGLAS ZWIEBEL <
[hidden email]>
> Cc: Elecraft Reflector <
[hidden email]>
> Message-ID: <
[hidden email]>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
>
> In addition to the SWR bargraph, which is available at all times when
> transmitting, the SWR is shown numerically on the VFO A display during
> TUNE (up to 99.9:1). Power in watts is shown on the VFO B display.
>
> The only time SWR is not shown during TUNE is when you're using the
> 0-dBm transverter I/O (on the KXV3 module). In this case, we assume
> that the device you're driving (a transverter) has low enough SWR. The
> VFO A display shows the power level in dBm, and VFO B shows the power
> in milliwatts (with .01 mW resolution). The transverter's power output
> detector can be calibrated using a menu entry, as can the RF detector
> in the main RF path.
>
> Wayne
--
God could not be everywhere, and therefore he created mothers.
-Jewish proverb
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
