If your SR uses the 8192 xtal, then the global offset should be near
-23000. All the other offsets should be set to 0 and let NaP3 poll the
K3 for mode offsets. If you sidebands are reversed, just reverse your
audio cables.
Larry N8LP
On 1/20/2012 10:30 PM,
[hidden email] wrote:
> Date: Fri, 20 Jan 2012 10:38:05 -0800 (PST)
> From: k5oai<
[hidden email]>
> Subject: Re: [Elecraft] [K3] Aliases in Softrock panadapter display
> To:
[hidden email]
> Message-ID:<
[hidden email]>
> Content-Type: text/plain; charset=us-ascii
>
> I use LP-Bridge v1.02 and NaP3 with my K3 and softrock my Global settings
> differ
> Global offset has to be set at -23070 the rest are the same as Tony's.
>
> I have tried to use LPB2 v1.01
> and neither the -6000 or 23070 settings work for me
> for starters receive is on the wrong side no matter which LSB or USB
> and checking or un-checking I/Q shift doesn't fix it
> after playing a while PERHAPS if I set the global for -6000
> and then played with each mode's setting individually, I could get it to
> work
>
> much to much effort
> I finally just settled for running
> LP-Bridge v1.02 and NaP3
> works great.
>
> --
> ymmv
> Sam Morgan
> K5OAI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
