Re: [Elecraft_K3] Notch control

[Dick Roth]

I believe that this procedure will adjust notch center frequency rather
than bandwidth.

--
73 de Dick, ka1oz
Elecraft K3/100
GAP Titan-DX Antenna



On Tue, 2011-08-30 at 04:58 -0700, Steve WU9B wrote:

> Try holding (instead of tapping) the notch button. Then adjust BW with the 2nd VFO knob.
>
> 73, Steve WU9B
>
> On Aug 29, 2011, at 5:59 PM, kk6ue wrote:
>
> > Hi ALL;
> > A question: I looked through the documentation and did not see any way to adjust the notch bandwidth. If I am running JT65 and I and I wanted to notch out one specific signal, I can do it almost....but not quit all of it. I can use the shift and width to control the entire band pass just wanted a little finer control while still copying all the other signals.
> > Thanks
> > Bob Paull
> > KK6UE
> >
> >
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
>     http://groups.yahoo.com/group/Elecraft_K3/
>
> <*> Your email settings:
>     Individual Email | Traditional
>
> <*> To change settings online go to:
>     http://groups.yahoo.com/group/Elecraft_K3/join
>     (Yahoo! ID required)
>
> <*> To change settings via email:
>     [hidden email]
>     [hidden email]
>
> <*> To unsubscribe from this group, send an email to:
>     [hidden email]
>
> <*> Your use of Yahoo! Groups is subject to:
>     http://docs.yahoo.com/info/terms/
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html