Thanks for the help guys, but the resolution you suggested is not what I used. I was putzing around with it after I sent the email and happened to push & hold the VOX button and that seemed to reset something...I don't know exactly what happened. Maybe turning the VOX on & off unlinked the VFOs somehow.
I think some strange commands got sent over the serial link while I was using K3BSR. Can't say for sure but I don't recall ever pushing the SUB button until I noticed the problem. I did turn the SUB on & off a couple of times but the VFOs still appeared to be linked.
It seems to be ok now, so all is well that ends well.
Stan Rife
W5EWA
--- On Fri, 1/22/10, Richard Ferch <
[hidden email]> wrote:
From: Richard Ferch <
[hidden email]>
Subject: Re: [Elecraft] K3BSR
To:
[hidden email]
Date: Friday, January 22, 2010, 3:17 PM
You wrote:
> A & B VFOs are on the same frequency and are tuning together with the
> right most decimal point in the B VFO flashing. How do I get it out of this
> mode?
Your VFOs are LINKed. Hold the SUB button to unlink them.
73,
Rich VE3KI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
