Re: Elecraft contributor scaling Wyoming peaks with KX1

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: Elecraft contributor scaling Wyoming peaks with KX1

g4ilo-2
As a matter of interest, what kind of propagation can you expect working HF
from a mountain top, compared to say a riverside or beach location?

Years ago I used to work 144MHz, so I know that it can make a big
difference on those frequencies. But I wonder whether it makes a difference
at HF.

73,
--
Julian, G4ILO. (RSGB, ARRL, G-QRP, K2 #392)
G4ILO's Shack: http://www.qsl.net/g4ilo




_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: Elecraft contributor scaling Wyoming peaks with KX1

Jim Brown-10
On Mon, 26 Jul 2004 09:39:50 -0100, Julian, G4ILO wrote:

>As a matter of interest, what kind of propagation can you expect working HF
>from a mountain top, compared to say a riverside or beach location?

Having just put a new mountaintop QTH on the air, I can offer my experience on
the  basis of a dozen or so hours of operation. See W6BX at qrz.com.  So far, I
have two antennas up, both sloping half-wave dipoles rigged from the top of the
tower down toward the ground. My experience so far is that these antennas at this
qth on 160, 80, and 40 are significantly more effective (I would guess at least 6
dB, maybe more) than horizontal dipoles at my home qth in Chicago.

After a lot of study of various antenna books (including ON4UN's book and a lot of
stuff from ARRL), I purposely chose sloping dipoles because I didn't want to be
dependent on what I expect to be poor soil conductivity at the top of this mountain.  
At a riverside or beach location I might have been more inclined to use a
traditional vertical.

One of the other obvious advantages of a remote site is the absence of local
noise.

Jim Brown  K9YC


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com