I have two of the original A123 SLA style 7AH sized batteries, model ALM-12V7 and use them with my KX3. They have eight ANR26650 cells arranged in a 4S2P config. The ALM-12V7s can be arranged in series or parallel systems the same as ordinary SLAs.
Internal to the battery package are the following circuit functions - Overcharge protection and pre-charge circuits- 30 A plastic blade fuse (replaceable)- Charger detection and voltage regulation- Micro controller and cell balancing- Over discharge protection Any discharge due to the internal circuits is so small that they recommend charging every three years if they are kept in storage. An ordinary lead acid charger can be used or a fixed 14.4V 10A power supply. There was no specialized A123 charger made for these batteries. Which model of A123 battery did you have? I think some company used to sell home made packs based on individual A123 sells and that company hawked their own charger for their packs. Jim On Monday, June 1, 2020, 6:06:09 PM PDT, [hidden email] <[hidden email]> wrote: ---------------------------------------------------------------------- Message: 1 Date: Mon, 1 Jun 2020 07:42:45 -0700 From: Eric Norris <[hidden email]> Subject: Re: [Elecraft] External battery for KX2, field day and SOTA --------------The original A123 batteries use a balancing system built into their specialized chargers, and they hold their charge much longer. ------------------------ 73 Eric WD6DBM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Jim,
These were LiFePO4 (Lithium Iron Nanophosphate) A123 packs, sold then in 4S1P, 4S2P, and 4S4P configuration. Totally different animal from what you are talking about, and as I said, no internal balancing. They had balancing harnesses for hooking up to Cellpro 4S and 10S chargers. The individual cells were much larger than 26650 cells. 73 Eric WD6DBM On Mon, Jun 1, 2020, 8:35 PM Jim <[hidden email]> wrote: > I have two of the original A123 SLA style 7AH sized batteries, model > ALM-12V7 and use them with my KX3. They have eight ANR26650 cells arranged > in a 4S2P config. The ALM-12V7s can be arranged in series or parallel > systems the same as ordinary SLAs. > > Internal to the battery package are the following circuit functions > > - Overcharge protection and pre-charge circuits > - 30 A plastic blade fuse (replaceable) > - Charger detection and voltage regulation > - Micro controller and cell balancing > - Over discharge protection > > Any discharge due to the internal circuits is so small that they recommend > charging every three years if they are kept in storage. > > An ordinary lead acid charger can be used or a fixed 14.4V 10A power > supply. There was no specialized A123 charger made for these batteries. > > Which model of A123 battery did you have? I think some company used to > sell home made packs based on individual A123 sells and that company hawked > their own charger for their packs. > > Jim > > > > > > > > On Monday, June 1, 2020, 6:06:09 PM PDT, [hidden email] > <[hidden email]> wrote: > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 1 Jun 2020 07:42:45 -0700 > From: Eric Norris <[hidden email]> > Subject: Re: [Elecraft] External battery for KX2, field day and SOTA > > --------------The original A123 batteries use a balancing system built > into their specialized chargers, and they hold their > charge much longer. ------------------------ > > 73 Eric WD6DBM > > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Mine are also LiFePO4 and extremely trouble free
Jim On Monday, June 1, 2020, 9:17:16 PM PDT, Eric Norris <[hidden email]> wrote: Jim, These were LiFePO4 (Lithium Iron Nanophosphate) A123 packs, sold then in 4S1P, 4S2P, and 4S4P configuration. Totally different animal from what you are talking about, and as I said, no internal balancing. They had balancing harnesses for hooking up to Cellpro 4S and 10S chargers. The individual cells were much larger than 26650 cells. 73 Eric WD6DBM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Free forum by Nabble | Edit this page |