Re: Is it possible to monitor digital, transmissions.

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Re: Is it possible to monitor digital, transmissions.

Jerry Deibel
Jess (AE0CW),   Thanks for your reply and offer for the cable,  but I
allready have my interface hooked up and working.

Doug (N7BNT),   I have the PSKMETER and it's a great tool for PSK.  I
use it also to set up the audio level for rtty, and the other digital modes.

What I mean is that my Yaesu MP rig has a transmit monitor build in,  so
that while I am transmitting  rtty, psk, cw or voice, I am able to hear
it on the MP's speaker.   I wanted to know if the K2 had that same feature.
What I have done to listen to what I am sending is to  put a "Y"
connector on the Speaker out on the PC and 1 side goes to interface and
then on to the mic audio in on the K2.  The other side of the "Y" goes
to my PC speaker.
This works,  but the sound was terrible, mostly hum.   I since changed
to a better PC speaker and it seems ok now.
When I run my MP I turn my PC speakers off,  just wanted to do the same
with the K2.
Jerry, N2uz
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com