Hi George,
The only voltages you quote that are a bit low are derived
by the AGC and they would be low with the set out of alignment anyway,
If you are getting the broadcast station by touching pin 4 of U2, the audio
stages are working anyway!
Don't get mixed up with the voltages for U1 in the "Appendix E Trouble
shooting page 7" table . It is easy to select the U1 voltages for the
*Front panel* and not the *RF * board U1 . The U1 voltages you need to
check against is in column 12 of the Table.
It would be interesting to know how far through the Stage 1 testing you
got, and why you suspect U1 and U2 as the problem?
Cheers.....Ron ZL1TW
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
