Re: K1 Internally Generated Signal (Long Response) Correction

[Mike Morrow-3]

I wrote:

> My K1 uses an CW offset of 600 Hz.  That means that when my K1
> is zero beat with 10000 MHz WWV, the frequency displayed should
> be 600 Hz below 10000 kHz, or 9999.6 kHz.

That last figure should have been "9999.4 kHz".

Mike / KK5F
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html