I made a stand using some aluminum fencing wire. It’s pretty large gauge, about 1/8” in diameter. It bends in about 1/8” at each end (very short so as to not touch anything inside) and depends on the springiness of the wire to stay in the holes. Then it angles down, then forward, then across to the other side. The whole thing rotates backwards and fits flush against the bottom of the radio when not in use, and it raises the front by about 2” when it’s lowered for use. Works great, cheap, essentially zero weight. :-)
Doug, w0uhu.
Date: Mon, 28 Sep 2015 17:25:21 +0000 (UTC)
From: William Redfearn <
[hidden email] <mailto:
[hidden email]>>
To: "
[hidden email] <mailto:
[hidden email]>" <
[hidden email] <mailto:
[hidden email]>>
Subject: [Elecraft] [K1] Want K1 Tilt Stand
Message-ID:
<
[hidden email] <mailto:
[hidden email]>>
Content-Type: text/plain; charset=UTF-8
Looking for a K1 Tilt Stand.
Looks like Elecraft no longer sells this option.
Anyone have one to let go?
?73,?
Dave Redfearn
ARS?N4ELM? Lafayette, LAQRL? de N4ELM/qrp?
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
