My K2 has 0.1uV sensitivity for 10 dB signal to noise on 10m with
pre-amp on, or 0.16uV with pre-amp off. The K2 has quite low gain
compared to many radios and often needs the pre-amp switched in for the
higher bands, also have you checked the alignment?
There are various tables of measurements on my web site at:
http://www.astromag.co.uk/k2/73 Dave, G4AON
K2 #1892, K3 #80
------------------------------------
I have not been able to find any posts about the sensitivity on
15m-12m-10m being
not so great. On 40m-80m-160m it is what I would expect. 20m it's just OK
with wider filters, but there is plenty of internal noise with the
narrower filters.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
