Re: K2 - KDSP2 Circuit Diagrams

[Don Wilhelm-4]

Kevin,

Since you are searching for a possible break in the board traces or a
thru-plated hole, you may do better with a scan of the board rather than
the schematic.  There are scans of the KDSP2 board available at Tom
Hammond's website www.n0ss.net

73,
Don W3FPR

KBG Luxford wrote:
> I am trying to find a fault in my KDSP2.  Do circuit diagrams of the
> two boards exist with higher resolution of the logic signals?  Many of
> the signals in the diagrams in the manual seem to be done with a low
> resolution dot matrix printer and they are awfully hard to read.
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

> I am trying to find a fault in my KDSP2.  Do circuit diagrams of the two
> boards exist with higher resolution of the logic signals?

Please go the Elecraft website, click on products, click on K2, click on
KDSP2, scroll to the bottom of the page and you will find links to high
resolution schematics of the DSPx module and the KDSP2.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com