Just finished building the K2 this past week.
I have alligned and proceeded to check Power output.
>>Had a problem. With help from Gary AB7MY, I found I did not install
Z1...therefore one of my problems. I installed Z1 and recheched solder connections
on the Band Pass Filters...
Now got proper power output on 12 and 10 meters.>>(9.5 watts).
But still have problems with power on 80m=1.5 watt, 17m=4 watts and 15m= 1.5
watts..
Does anyone had any 'suggestions' where to look for the problem that is
causing my power output on 80-15-17 meters to be low?
What would be 'common' to 80-15-and 17 meter power output??
K3nvi
Dennis, York, PA
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
