Re: K2 and Kenwood SP-50 Mic

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: K2 and Kenwood SP-50 Mic

ken mcmahon
Thanks Jim,

I should have mentioned;

I already have the 8 pin DIN connector at the rig end of the mic cable.
However, I don't know what the pin-outs are.
I've Googled it to no avail...

Page 18 of the KSB2 manual shows info for the MC-60 and I don't want to
assume it matches the MC-50.

Thanks,

Ken - WZ6P
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K2 and Kenwood SP-50 Mic

Jim Brown-10
On Fri,12/30/2016 10:30 AM, ken mcmahon wrote:
> Page 18 of the KSB2 manual shows info for the MC-60 and I don't want to
> assume it matches the MC-50.

Ken,

Connector pin-outs tend to be consistent within a brand of radio.
Kenwood, Icom, and Yaesu each have their own way of doing it, and they
are all different from each other.

73, Jim K9YC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K2 and Kenwood SP-50 Mic

Don Wilhelm
A multitude of microphone information can be found at
http://www.qsl.net/g4wpw/date.html.  Thank QSL.net for preserving this
website information, G4WPW is now SK.

73,
Don W3FPR

On 12/30/2016 1:44 PM, Jim Brown wrote:
> On Fri,12/30/2016 10:30 AM, ken mcmahon wrote:
>> Page 18 of the KSB2 manual shows info for the MC-60 and I don't want to
>> assume it matches the MC-50.
>
> Ken,
>
> Connector pin-outs tend to be consistent within a brand of radio.
> Kenwood, Icom, and Yaesu each have their own way of doing it, and they
> are all different from each other.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]