Re: K3 CW decode (Dave G4AON)

[giuliano-8]

Yes, Dave
I am using an external keyer,
thanks for info.
But i don't understand why!
73
Giuliano I0CG
K3 #1814

-----------------------------

From: Dave G4AON <[hidden email]>
Subject: Re: [Elecraft] K3 CW decode
To: [hidden email]
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Giuliano are you using paddle input? There isn't a parameter to give
receive decode without TX decode, it works for me using paddles, not
tried it with a straight key or external keyer.

73 Dave, G4AON
K3/100 #80
----------------------------
my new K3 decode well the recived CW but don't decode my transmission.
Eny suggestion?
Thanks for help
Giuliano I0CG


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bob Cunnings NW8L]

See pg. 33 and pg. 34 of the K3 Owner's Manual. It states that text
decode in CW works if you use the K3's internal keyer (paddle input).
It doesn't work when straight key or external keyer. The Manual could
be more definite on this point, it seems to come up often.

Bob NW8L

On Sun, Sep 28, 2008 at 7:48 AM, Giuliano <[hidden email]> wrote:

> Yes, Dave
> I am using an external keyer,
> thanks for info.
> But i don't understand why!
> 73
> Giuliano I0CG
> K3 #1814
>
> -----------------------------
>
> From: Dave G4AON <[hidden email]>
> Subject: Re: [Elecraft] K3 CW decode
> To: [hidden email]
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Giuliano are you using paddle input? There isn't a parameter to give receive
> decode without TX decode, it works for me using paddles, not tried it with a
> straight key or external keyer.
>
> 73 Dave, G4AON
> K3/100 #80
> ----------------------------
> my new K3 decode well the recived CW but don't decode my transmission.
> Eny suggestion?
> Thanks for help
> Giuliano I0CG
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bill Steffey NY9H]

>if you use the K3's internal keyer (paddle input).
>It doesn't work when straight key or external keyer. The Manual could
>be more definite on this point, it seems to come up often.
>
>Bob NW8L


AND...  as I forgot yesterday, your paddle hooked up to your keyer
will NOT program the K3 internal memories either....gotta be direct
to the K3 paddle input.

bill

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com