Re:K3 HAGC MOD using THRU-HOLE COMPONENTS - STOP THE PRESSES!!

[Benny Aumala]

Originally R41 and R42 (47k) parallel to 100k makes 32k.
New advice says  R41 and R42 paralleled with 47k (gives 23k).

Which is right?
SMD application replace R41 and R42 with 33k.

Benny              OH9NB



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[M0XDF]

Tom says in him mail.

he got the values the wrong way around, the SMD resistors in situ on  
the board are 100K

the end result should be approx 33K = therefore you add 47K resistors

73 de M0XDF, K3 #174
--
Sometimes I think we're alone in the universe, and sometimes I think
we're not. In either case, the idea is quite staggering.
-Arthur C Clarke, science fiction writer (1917- )

On 1 Apr 2008, at 10:26, Benny Aumala wrote:
> Originally R41 and R42 (47k) parallel to 100k makes 32k.
> New advice says  R41 and R42 paralleled with 47k (gives 23k).
>
> Which is right?
> SMD application replace R41 and R42 with 33k.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com