Re: K3 Power Supply Question

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Re: K3 Power Supply Question

David F. Reed-2
  In response to many questions about what I chose, the answer is I
bought two different supplies, with different intended uses.

One was the Gamma Research unit, nice and small, but low capacity (okay
on SSB and CW, too low for digital modes unless you run 10 watts or so
due to its power duty cycle limitations.  It does fit easily in the
carry case side pocket of the case Rose Kopp makes.  It is fairly quiet
RF wise, but I have heard stories of failures from some folks.

The other is the PowerWerks switching unit,  It has much more capacity,
but is larger; it barely squeezes into the side pocket and once in, is a
tight enough fit that I am worried that the carrying case could fail due
to the stress imposed.  It is also fairly RF quiet.

I have decided to use the Gamma Research unit on portable light duty
trips, and if anticipating Digital modes, bring the PowerWerks unit
along.  Currently it powers the K3 in the shack.

Thanks a ll for your help and interest.

73 de Dave, W5SV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html