Elecrafters,
thanks a lot for the replies, especially K9ZTV, W1OH and K6NV.
Did some tests like plug one leg of the ladderline directly into the
so239 socket, hooked the receive-antenna to RX IN or AUX... Still No RX.
Swapping the K3SYNA boards brought both rx and tx back to life.
What puzzles me ist the fact that the SUB-RX also works fine.
So both K3SYNA boards seem OK. Initially i assumed the Main K3SYNA is
defective.
Maybe something had gotten loose or lost contact the moment i checked
the antenna match, dunno.
One more thing: The moment i removed the temp cables from the K3SYNA
boards i forgot their correct positions. (Always take a picture with
your mobile phone before you rip things apart)
Unfortunatelly,
http://www.elecraft.com/manual/E740126A%20KRX3A%20Subreceiver%20Installation%20and%20Operation%20Rev%20H2.pdf
doesn't work right now, so can i assume that i plugged all cables
correct, now that my K3 works again?.
--
73, Martin
Ohne CW ist es nur CB...
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
