Gerald open the manual to the Calibration section and do the Reference
Oscillator calibration - use Method 2 for best results.
The resulting frequency may be different than the original factory
setting (but it should be close).
73,
Don W3FPR
On 11/26/2017 11:36 PM, Gerald Manthey wrote:
> ​Hello
> I am Gerald Manthey and I was trying to set my Freq Calibration because
> everyone kept telling me I was off freq.
>
> I tried as I read on the forums with 5000, 10000, 15000 with regular and
> alt on CW.
> But I think I did something wrong. lol
>
> I went to put it back to factory and 1. Where I wrote it down got thrown
> away.
> 2. changed computer and did not have the recent back up config.
>
> I was wondering if you all kept files on the radio. I realize this is a
> long shot, but thought I would try. My K3 is Serial number 6294. I had it
> sent in for a K3syn board upgrade.
>
> I was able to find the very original config when the radio was brand new.
> Before the upgrades so I loaded it for right now. I had to go change the
> filter settings because I added the 6 since it was new.
>
> I had to turn on Tech mode, and I looked at the REF cal it is different
> from where I had set it.
>
> Okay just wondering what you would suggest?
> Thanks
> Gerald Manthey - KC6CNN
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
