Re: K3 beta firmware revision 3.14 now

[Mike Scott-7]

I think higher audio levels may be needed to test the speaker protection
function.

I inadvertently tested speaker protection. I was using the XG2 to do some K3
audio tests. I had the XG2 off and I turned the RF gain to full, AGC off and
audio up to where I could hear "Band" noise. Turning the audio up that high
was a mistake on my part. I then hit the K3 with an S9 signal. I woke up the
neighbors and triggered speaker protection as I was really over driving the
audio at that point.

I thought I had blown an audio stage but remembered the protection feature
that worked on over current. So, sure enough the speaker setting had been
changed to Speakers = 1.

At least I didn't put 100 watts into the XG2 :)

Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
NAQCC 3535
K3-100 #508 / KX1  #1311


Message: 32
Date: Thu, 21 May 2009 07:54:23 -0700 (PDT)
From: pd0psb <[hidden email]>
Subject: Re: [Elecraft] [K3]  K3 beta firmware revision 3.14 now
        available
To: [hidden email]
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=UTF-8


Anybody else tested this?
I can't get speaker protection to work.
Or does it only work with higher AF levels?

73'
Paul
PD0PSB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html