> Anyone on the list experience this problem before?
Yep. Not me, but here is the description of the "KPA3 12V sense mod"
on the Elecraft website:
"This modification adds a diode to the KPA3 12V sense circuit to hold
the voltage to no more than 0.6V when the K3 is turned off. Without
it, some K3s refuse to turn off when the POWER button is tapped
because the 12V sense circuit does not drop to a low enough level to
shut down the K3’s MCU."
Checkout the web page at: <
http://www.elecraft.com/K3/k3_app_notes.htm>
Mark AD5SS
On Fri, May 15, 2009 at 7:31 PM, Robert Mccormack <
[hidden email]> wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html