Re: KAT-100-1 not responding to K2 with a KAT2 (N9KO)

[Roland-44]

Well I have a KAT2 and external a KAT100-2 with KPA100 in it.
http://www.kk7p.com/k2kpa100.html
Scroll down 75% of the website to "Integrating the KPA100 and KAT100 into
the EC2 Case".

First I had to do was setting PA=ON in 2nd K2 menu.
This option set the internal KAT2 automaticly in bypass mode so all auxbus
commands goes to the KAT100-2/100 from now.

When the power of the KAT100-2/100 will be lost/removed the internal KAT2
went back to controll.

But I am not sure you have this option too, because I think this option is
comming from the KPA100 processor ??
You never know. Maybe you have to remove the KAT2... but that is not a
lovely option, I guess.
Order a KPA100 and a EC-2 extention kit perhaps? ;-)

73, Pe1PHU
Roland.
K2#3195 external KPA100-2/100





_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com