"Once you turn it OFF with the front panel switch, it needs to be turned on
the same way. After that, yes the utility is fully functional."
I suspect the serial connection is getting confused and not properly
reconnecting in the power up/down situation. I see that between the K3 and
the Win4K3 suite frequently. If I power down the K3 I usually need to
restart the computer to get all the serial connections talking again.
This could well be an artifact of the specific serial connectors used.
PRoblems with one band of chip versus another are a constant source of
conversation.
As per the engineers and the experience of others, the behavior you're
seeing is not part of the design per se.
73 Chris NW6V
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
