Re: KPA500 Kit #400 problems -solved --

[DK2GZ]

 
Hello
 
the problem was the 10pin ribbon cable to the I/O board. It was attached in
 the wrong direction on the power supply board and then therefore also  on
the I/O board, because the plugs are coded. I did reset the ribbon cable in  
the right way and all problems now solved. Bandswitching is also working  
perfectly.

 
73 de Harry,  DK2GZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html