So I hope the audio mixer will mix both left and Right for main and
sub and allow us to use CONFIG:SPKRS=2 and CONFIG SPKR+PH=YES again.
Although, when listening to the speaker, I would probably be fine with
just the main.
73 de M0XDF, K3 #174
--
Always remember, half the people in the world are above average
intelligence!
On 2 Sep 2008, at 17:47, Lyle Johnson wrote:
> We've had a number of support requests regarding KRX3s with no audio.
>
> PLEASE be sure that you have *CONFIG:SPKRS 1* set on your K3 when
> you attempt to bring up the KRX3 for the first time. You may have
> set CONFIG:SPKRS to *2* for use with your stereo headphones,
> especially if you have CONFIG SPKR+PH YES. In a K3 without the
> KRX3, this works fine.
>
> But with the KRX3 you will *not* hear the sub receiver audio in the
> internal speaker with these settings.
>
> There is a flexible audio mixer in the code being developed to make
> all this simpler.
>
> In the meantime, when you first bring up the KRX3, I suggest you set:
>
> CONFIG:SPKRS 1
>
> CONFIG:SPKR+PH NO
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
