Hi Bruce,
I was fortunate enough to be one of the KX-1 Beta testers. So I am well
aware of the DDS clock limitations, and of the two LPF's in the KX-1 with
"knee's". just allowing 20M operation.
But my "nudge, nuidge, wink, wink" was directed - with my tongue firmly in
my cheek- at the possibility (no matter how remote) of Elecraft, after the K3
hiatus has settled down, considering a companion to the KX-1.
Perhaps a KX-2(?) with a similar form factor, power and options, covering
20,17, 15 and 10 meters or better still 17,15,10 and 6 Meters..
8 bands with two rigs... one in each pocket, with most of our home-brew
accessories capable of being used with both...
WIth the upswing in the Sunspot cycle the next decase will be fantastic for
QRP operation..
Anyway.... I can dream, can't I???
On 25 Nov 2007 at 23:59, Bruce Beford wrote:
>> The DDS is driven by a 50 MHz clock. This sets the maximum clean
>> output frequency at about 16.6 MHz. (Clk/3). There is also a 14 MHz
>> low-pass filter on the output of the DDS.
-
Dave G, KK7SS
'65 MKIII Sprite, Richland, WA
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
