I wonder how stable is the KX2 in digital modes?
My KX3 with the temperature compensation carried out was inadequate when
running wspr at 5 watts output.
However, this was before Elecraft introduced the improved heat sink.
Rob G3RCE
On Nov 24, 2017 13:23, "Howard Hoyt" <
[hidden email]> wrote:
> Hi Barry,
>
> While using the KX2 in just about any digital mode above 5 W or so, we
> found the PA temp will reach thermal limit fairly quickly, which is why
> Elecraft rates the KX2 at 5 W in digital modes, and why we came up with an
> improved cooling solution. (commercial content) Many owners who wish to
> run more than 5 W in digital modes have purchased the Pro Audio Engineering
> Kx22 Heatsink, which allows for an average (band and ambient temp
> dependent) 200-250% increase in transmit time before thermal limiting kicks
> in.
>
> Cheers & 73,
>
> Howie - WA4PSC
> www.proaudioeng.com
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
