Re: KX3-2M TO-220 Retainer and Nylon Screw

[Steve Zabarnick]

*I also have a KX3 that does not use the TO-220 retainer.*

*This is SN 2829. *

*Steve N9SZ*



*>Subject:    [Elecraft] KX3-2M TO-220 Retainer and Nylon Screw

>From:       AL7CR <al7cr () mooseaviation ! com> <https://marc.info/?a=147121421600001&r=1&w=2>
>Date:       2020-07-20 3:37:22 <https://marc.info/?l=elecraft&r=1&w=2&b=202007>
>Message-ID: 7b6bdb8d-3089-4116-b28b-01f820ac6286 () www ! fastmail ! com <https://marc.info/?i=7b6bdb8d-3089-4116-b28b-01f820ac6286%20()%20www%20!%20fastmail%20!%20com>
>[Download RAW message <https://marc.info/?l=elecraft&m=159521638214632&q=mbox> or body <https://marc.info/?l=elecraft&m=159521638214632&q=raw>]*
>
>Does anyone know if these parts are a recent change?  My pal is sending me his board and it did not have these parts.  The heat sink was attached to the case directly with a metal screw and the nylon screw was not present and the hole for it empty.
>
>If the parts are strictly required I will try and get them from the factory tomorrow.
>
>Thanks for the help.
>
>AL7CR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]