Thanks to suggestions from Dick Dievendorff, the problem seems to be an
interaction between the XKPA100, and the software I was running, DXLab
Suite, in particular Commander. I had continuous interrogation turned
on. If the software was started before the station equipment, in
confused the power-up of the KXPA100 which occasioned the other bad
behavior. By turning the continuous interrogation off, the order of
power up and software does not affect things.
> On 3/12/15 4:59 PM, David F. Reed wrote:
> Folks,
>
> up til today my combination in the subject line has worked
> flawlessly. Today a couple of problems surfaced.
> (1) the power switch on the PX3 is intermittent for ON, always works
> OFF. In other words, it does not always power ON when asked to, but
> always powers OFF when requested to. Not a big deal, but would be
> nice to fix...
>
> (2) the KXPA100 would not come on; in trying to track it down, I
> observe that the PA mode in the KX3 was OFF; setting it to ON, the
> KXPA100 turns on, and the Sys Fault LED flashes, then it turns off the
> KX3 PA mode and itself OFF. Big deal, and would love to fix it.
>
> I have rechecked all the cabling and removed and reinserted it i to no
> avail.
>
> Thoughts or suggestions?
>
> Thanks & 73 de Dave, W5SV
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
