Re: KX3 firmware rev 1.38: Programmable switch macros

[Jim Sheldon]

Bingo!  Works just like advertised.  Thanks Wayne.

I set mine up for PF1 to set up the up-2 split and PF2 to cancel the split and put things back the way it was.

The SPLIT cancel commands for MACRO 2:  Label = NOSPLIT  commands =  SWT25;SWT25;FT0;RT0;XT0;

(double press A>B, set TX VFO back to A, make sure RIT and XIT are still off)

Jim - W0EB



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jim Sheldon]

Dang, now I need another button for a third macro!  Never thought of doing that one.

Jim - W0EB

> I'm glad I finally found a way for you to turn the rig off with one
> switch press, Emory :)
>
> 73,
> Wayne
> N6KR
>
> On Mar 2, 2013, at 9:15 AM, WM3M wrote:
>
>> Wayne, and the testing group,
>> It all seems to work fine so far but will do more testing. I have
>> created two macros for the PF switches.
>>
>> PF1 - changes vfo to 6 mtr calling freq -
>> BN10;FA00050125000;FB00050062500;
>>
>> PF2 - turns off KX3 using only one button - SWH26;SWH26;PS0;
>>
>>
>> Emory  WM3M

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html