I agree with everything that's been said about the Ridge loads. I have been recommending them for a couple years to customers of the LP-100A kit for use in calibration. One note: make sure you have an appropriate BNC to N adapter as their loads tend to all have N connectors (usually male).
73,
Larry N8LP
Date: Wed, 24 Feb 2010 13:00:02 -0500
From: Don Wilhelm <
[hidden email]>
Subject: Re: [Elecraft] Need to select a dummy load for K3 TX
calibration...(advice?)
To: Don Nelson <
[hidden email]>
Cc:
[hidden email]
Message-ID: <
[hidden email]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Don,
He is *offering* it up for bid at a starting price of $9.99 - that is
not the same as "selling" it. Who knows the bidding may go up to $50
before the 3 days have ended.
So many people tell me about things like that quoting the bid price, but
when I look, the price is always higher. Please clarify if it is a
bidding price or a selling price (as in BUY NOW)
BTW, the Ridge Equipment dummy loads are very good. Too bad they no
longer have the 200 watt load nearly flat up to 1 GHz. I should have
gotten 2 or 3 instead of only one.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
