Re: New K2 build - encoder problem

[dw-4]

If you haven't already found the problem.
Another thing you can check is U2.
With the rig off, 3,4,5,6 & 11,12,13,14 should all read 100K ohms to VCC
pin(18)

With the rig on, these should all normally be at VCC voltage.
--
 [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html