I had used a "loop skywire" for 80 and up. The solution to drain static (and more) was found in RadCom's Technical topics many years ago : I permanently grounded the point opposite to the feed one, where there is 0 volt. No change for the link coupler.
Modelling with Eznec confirmed that the ground wire radiation is very low.
BTW it led to another use :
For top band DX, the open wire line was shorted and the antenna worked as a "top loaded-top fed" vertical.
Eznec showed that the antenna worked as well as a far higher vertical.
72 to all and season's greetings de F5LCI 100% CW QRP
--
_______________________________________________
Surf the Web in a faster, safer and easier way:
Download Opera 8 at
http://www.opera.comPowered by Outblaze
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
