I also found my P3 panadapter screen frozen after a period of about 3
hours of inattention. I was not using the computer or the K3 at the
time although both were on. I found it frozen in Span mode and I may
have left it in that mode when I left the room. For sure, changing the
span was the last thing I did before leaving the room.
LP-Bridge and DX4win on the computer are running and still running in
the background. I cycled power on the P3 and all is good now.
The p3 is not powered from the k3 but does come from separate ports on
the same Rigrunner 4102 connected to a Yaesu FP-1030A 25 amp continuous
rated supply.
LP-Pan was disconnected yesterday.
K3 #125 Firmware version 4.05, P3 #157 with FW version 00.32.
Aloha,
John KH7T
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
