Fred,
The red adapter is the correct one, but depending on your Proset, it may
or may not need bias. If it is the Proset-iC or the Proset-K2, it will
need bias, but if it is any other, bias should not be applied (adding
bias may saturate the microphone element and cause its output to be zero).
Please understand which microphone element you have and apply bias or
not apply bias accordingly.
A Heil microphone is not necessarily a Heil microphone, there are many
models and you must be specific about wihic one you have if we are to
offer good advice as opposed to "guesses".
BTW - what are you referring to as the "Y" junction? I can guess that
it might be the PTT jack on the Heil adapter, but please be specific so
we do not have to make assumptions.
73,
Don W3FPR
On 2/25/2012 7:53 PM, Fredric Serota wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html