Re: Pumping with AGC

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Re: Pumping with AGC

Dan Atchison
Gary:



Guy, K2AV, said,



"Make sure in Config Menu you have AGC PLS nor."



This is the probably the single best suggestion of all other than
riding the RF gain.  Most prevalent and especially during contests are
key clicks - hard keying - which extend at times several kHz fore and
aft of the carrier freq.  If AGC PLS is set to "OFF" the key clicks
will surely affect the AGC.  In my opinion, the K3 handles this
situation better than any other rig I've used - which is many.  Again,
make sure AGC PLS is "nor."  I have no troubles, even on the topband
with preamp on, with AGC pumping and a 200 Hz filter.



73,

Dan -- N3ND





_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com