Re: Trying to get LP-100 PLOT to make K3 output

[N8LP]

  Jim, set the control in Plot to Kenwood, keying mode to FSK. Set the
K3 for Data and sub-mode to FSK-D or PSK-D. Works like a champ.

73,
Larry N8LP


On 4/20/2011 12:00 PM, [hidden email] wrote:

> Message: 25
> Date: Wed, 20 Apr 2011 00:42:06 -0400
> From: Jim Stafford<[hidden email]>
> Subject: [Elecraft] Trying to get LP-100 PLOT to make K3 output
> carrier
> To:[hidden email]
> Message-ID:<[hidden email]>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Anyone done this.  I did it a long time ago with an ICOM but have
> never gotten the K3 to key.  It changes the frequency and mode, etc
> so I know the connection is good but I've tried DTR RTS and RTS DTR on
> the PTT-KEY
> option but to no avail.  There is only a K2 method of interfacing between
> rig and software so that may not be the best for the K3.
>
> I have also tried using the "Kenwood" interfacing to the rig.  It appears to
> key the K3, the red light comes on, but does not KEY the rig to get
> output power.  I can at that point during the 1 second intervals, key
> the rig manually and get a data point for each and a plot for the band.
> Just can't
> get it to work all automatically.
>
> Thoughts?
>
> jim/w4qo

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html