Re: Using the internal K144xv to feed other

[Dave-3]

I have been doing this for years now for 1296 through 24048Mhz

Quote from the K3 manual XV RF:  "But if the K144XV is being used as an IF
for a higher-band
transverter, you can set it to the lower edge of the higher band.

For example for 1296MHz I Set the XVn ADR to int trn1 and XV RF to 1296

Dave
WW2R

 I have the internal 2 meter transverter.  I would like to use it to feed my
other transverters for 2, 3, 5 and 10ghz.

However, when setting it up in the K3 I don't see that I can drive a
transverter from a transverter.

Has anyone tried this before?  The XV RF setting only goes up to 50mhz and I
don't see how I could feed one from another.

 

Dave N6TEB



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]