Chuck,
I ordered my KX3 without the battery charger with the specific intention of never putting batteries into the radio. I have seen too many products destroyed over the years by defective batteries. In addition, splitting the halves which are connected by a ribbon cable seems too much wear and tear for my dollars.
My only option for HF is portable on local hilltops.
I bought two Bioenno Power BLF-12045W - a bit costly - well worth it to me. They arrive with anderson powerpoles on the output. These batteries stay above 12v for more than 3hrs with an 80/20 listen/transmit operation - this keeps my KX3 at the higher output wattage. I recommend Bioenno's charger for their batteries.
Hope this is helpful.
Craig - KM4ASH
Birmingham, Alabama
------------------------------
Message: 11
Date: Sat, 16 Mar 2019 22:22:58 +0000
From: "hawley, charles j jr" <
[hidden email]>
To: "
[hidden email]"
<
[hidden email]>
Subject: [Elecraft] Why are the
batteries internal to the KX3?
Message-ID:
<
[hidden email]>
Content-Type: text/plain;
charset="iso-8859-1"
I don't like to disassemble the KX3 to
take out the batteries when not using or to do battery
maintenance.
I would rather have a slim case with
the same rectangular outline as the KX3 that attaches to the
rear panel and just plugs into the KX3 thru the external DC
input.
Has anyone done that as an accessory
product?
Chuck Hawley
[hidden email]
Amateur Radio, KE9UW
aka Jack, BMW Motorcycles
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html