Hi Andy,
I suppose you could do this, but it might defeat part of the purpose of
shrinking the paddle down to its small size and weight. I'd recommend
balsa ;)
There's enough surface area on the bracket that you could drill a hole
and mount it on something besides the K2 tilt stand. For example, it
should be possible to use just the front half of the bracket as a mount
for the K1 tilt stand. You'd have to drill one hole.
73,
Wayne
N6KR
Andrew Catanzaro wrote:
>
> Does the KXPD1-K2 have enough of a foot print that holes could be made
> in it
> so that it could be screw-mounted on a hardwood board? When I'm
> running
> portable, I usually have my laptop in the center of the table, the K2
> on the
> left, and my paddle on the right. By mounting the paddle on the
> distal end
> of a flat board, the weight of my wrist would hold the board and
> paddle down
> without the weight normally associated with desk paddles. ...
> ---
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
